How to make these food fridge magnets

Required Materials：

1. A4 color inkjet coated paper (120g)

2. Color inkjet printer

3. Paper Cutter

4. Circle Cutter

5. Button Maker Machine

6. Button Parts(1 * tinplate top cover, 1 * tinplate bottom , 1 piece of plastic film and 1 *magnetic sheet)

7. A wife who can paint and design(This is the key)

Production Process：

1. The first step is to draw a food and add a cute expression. Of course, my expression comes from my dog.

2. The second step is to put the designed pattern into the printed template. I have reference pictures of refrigerator magnet printing templates of various sizes. For example, if I make a 32mm one, the diameter of the large circle must reach 44mm.

3. The third step is to print the A4 paper you set. This step is relatively simple. I will not describe how to set up the printer and print.

4. The fourth step is to use a paper cutter to cut a column of paper vertically. The purpose of doing this is to be able to put this column of paper into the circle cutter later.

5. The fifth step is to cut the circle. Note that the diameter of the circular hole of the circle cutter should also be 44mm. Just cut out the pattern along the black circle.

6. The sixth step is the real production stage. Put the tinplate bottom in the circular mold on the right side of the machine. Be careful not to put it upside down, with the bottom facing down. Then put the top cover, pattern and film in the circular mold on the left side in turn. Then push the left mold to the middle of the machine and press hard. After releasing it, push the right mold to the middle of the machine, press it hard again, and after releasing it, you will get a beautiful iron button.

7. The last step is to stick the magnetic sheet in the material on the bottom of the finished product, and it is complete.